[1]郭 锋,苏 骏,周 翔. 高韧性水泥基材料基本性能研究[J].湖北工业大学学报,2020,(4):85-89.
 GUO Feng,SU Jun,ZHOU Xiang. Study on Basic Properties of High Toughness Cementitious Composites[J].,2020,(4):85-89.
点击复制

 高韧性水泥基材料基本性能研究()
分享到:

《湖北工业大学学报》[ISSN:1003-4684/CN:42-1752/Z]

卷:
期数:
2020年第4期
页码:
85-89
栏目:
湖北工业大学学报
出版日期:
2020-08-31

文章信息/Info

Title:
 Study on Basic Properties of High Toughness Cementitious Composites
文章编号:
1003-4684(2020)04-0085-05
作者:
 郭 锋1 苏 骏12 周 翔1
 1 湖北工业大学土木建筑与环境学院, 湖北 武汉 430068;
 2 湖北省桥梁安全监控技术与装备工程技术研究中心, 湖北 武汉 430068
Author(s):
 GUO Feng1SU Jun12ZHOU Xiang1
 1 School of Civil Engin.,Architecture and Environment,Hubei Univ.of Tech.,Wuhan 430068,China;
 2 Hubei Bridge Safety Monitoring Technology and Equipment Engineering Technology Research Center, Wuhan 430068,China
关键词:
 高韧性水泥基材料 抗压强度 抗折强度 养护龄期
Keywords:
 high toughness cementitious composites compressive strength folding strength curing period
分类号:
TU599
文献标志码:
A
摘要:
 为研究高韧性水泥基材料养护龄期与其力学性能之间的关系,对不同纤维掺量的水泥基材料开展抗压、抗折性能试验,测定不同纤维掺量的混凝土在7 d、14 d、28 d、35 d的抗压强度和抗折强度,并与基准混凝土试块对比。结果表明:纤维的掺入能够较好地提高混凝土的力学性能,高韧性水泥基材料的抗压强度和抗折强度与基准混凝土相比差异较大;基体抗压强度增幅不高而抗折性能有较大提高,试验抗折强度最高提高92.32%;高韧性水泥基材料抗压强度与抗折强度均随养护龄期的增加而增大,适当延长养护龄期有利于提高高韧性水泥基材料的工作性能。
Abstract:
 In order to study the relationship between the curing age of high-toughness cementitious composites and its mechanical properties, Non-standards compressive test and folding test were carried out on high-toughness cementititous composites with different fiber parameters. The compressive strength and folding strength of concrete with different fiber content were determined at 7 d, 14 d, 28 d and 35 d, and were contrasted with standard concrete test blocks. The results show that the fiber blending can improve the mechanical properties of concrete.The compressive strength and folding strength of high-toughness cementitious composites are greatly improved compared with ordinary concrete. The compressive strength and folding strength of High Toughness cementitious composites increase with the increase of curing age. Proper extension of curing age is conducive to improving the working performance of high-toughness Cementitious Composites.

参考文献/References:

[1] 邓明科,寇佳亮,梁兴文,等.延性纤维混凝土剪力墙抗震性能试验研究[J].工程力学, 2014, 31(7): 170-177.
[2] 胡春红,高艳娥,丁万聪.超高韧性水泥基复合材料受压性能试验研究[J].建筑结构学报,2013,34(12):128-132,154.
[3] 陈升平,李素华.PVA纤维增强水泥基复合材料的性能试验研究[J].湖北工业大学学报,2011,26(2):108-112.
[4] 徐世烺,蔡新华.超高韧性水泥基复合材料碳化与渗透性能试验研究[J].复合材料学报,2010,27(3):177-183.
[5] Wu C. Micromechanical tailoring of PVA-ECC for structural applications[D].Ann Arbor, Michigan: University of Michigan, 2001. 
[6] Li V C, Wang S, Wu H C. Tensile strain-hardening behavior of PVA-ECC[J]. ACI Materials Journal, 2001, 98(6): 483-492.
[7] Fisher G. The Defornlation behavior of reinforced ECC flexural members under reversed cyclic loading conditions[D]. Michigan: University of Michigan, 2002.
[8] 蔡向荣.超高韧性水泥基复合材料基本力学性能和应变硬化过程理论分析[D].大连:大连理工大学,2010.
[9] 中国工程建筑协会标准.纤维混凝土试验方法标准:CECS13:2009[S].北京:中国计划出版社,2010. 
[10] 中华人民共和国建设部.普通混凝土力学性能试验方法标准:GB/T50081-2002[S].北京:中国建筑工业出版社,2002.
[11] 陈宗平,余兴国,柯晓军,等.再生混凝土抗折强度试验研究[J].混凝土, 2010(6):58-60.

相似文献/References:

[1]熊韧,曹海印,王焱清,等.非牛顿润滑静压轴承的节流器流量方程修正[J].湖北工业大学学报,2019,34(5):6.
 XIONG Ren,CAO Haiyin,WANG Yanqing,et al.Modified restrictor flow equations of hydrostatic bearings ubricated by non-Newtonian fluids[J].,2019,34(4):6.
[2]王照远,曹 民,王 毅,等. 场景与数据双驱动的隧道图像拼接方法[J].湖北工业大学学报,2020,(4):11.
 WANG Zhaoyuan,CAO Min,WANG Yi,et al. Tunnel Image Stitching Method based on Scene and Data[J].,2020,(4):11.
[3]潘 健,梁佳成,陈凤娇,等. 单电流闭环多重PR控制的LCL型逆变器[J].湖北工业大学学报,2020,(4):16.
 PAN Jian,LIANG Jiacheng,CHEN Fengjiao,et al. Design of LCL Grid Connected Inverter based on Single Closed Loop Control and Multiple PR Controllers[J].,2020,(4):16.
[4]王晓光,赵 萌,文益雪,等. 定子闭口槽结构对永磁电机齿槽转矩影响分析[J].湖北工业大学学报,2020,(4):25.
 WANG Xiaoguang,ZHAO Meng,WEN Yixue,et al. Study on Cogging Torque and Vibration Noise of Permanent Magnet Motor with Segmental Stator and Closed-Slot[J].,2020,(4):25.
[5]宇 卫,凃玲英,陈 健. 风电场集中接入对集电线电流保护的影响[J].湖北工业大学学报,2020,(4):29.
 YU Wei,TU Lingying,CHEN Jian. Effect of the Collective Line Current Protection when Wind Farms are Centralized Accessed to the Power System[J].,2020,(4):29.
[6]廖政斌,王泽飞,祝 珊. 二惯量系统谐振在线抑制及相位补偿[J].湖北工业大学学报,2020,(4):34.
 LIAO Zhengbin,WANG Zefei,ZHU Shan. Online Resonance Suppression and Phase Compensation for Double Inertia System[J].,2020,(4):34.
[7]王 欣,游 颖,姜天翔,等. 面向3D打印过程的产品工艺设计和优化[J].湖北工业大学学报,2020,(4):39.
 WANG Xin,YOU Ying,JIANG Tianxiang,et al. Product Process Design and Optimization for 3D Printing Processes[J].,2020,(4):39.
[8]冉晶晶,文 红,罗雅梅,等. 全自动样品前处理平台及其控制系统[J].湖北工业大学学报,2020,(4):43.
 RAN Jingjing,WEN Hong,LUO Yamei,et al. Research on Automatic Sample Preprocessing Platform and its Control System[J].,2020,(4):43.
[9]杨 磊,马志艳,石 敏,等. 基于模糊PID的小型冷库过热度控制方法[J].湖北工业大学学报,2020,(4):43.
 YANG Lei,MA Zhiyan,SHI Min,et al. Research on Superheat Control Method of Small Cold Storage based on Fuzzy PID[J].,2020,(4):43.
[10]黄 晶,周细枝,周业望. 动态注塑成型模具的设计与实验研究[J].湖北工业大学学报,2020,(4):52.
 HUANG Jing,ZHOU Xizhi,ZHOU Yewang. Design and Experimental Study of Dynamic Injection Molding[J].,2020,(4):52.

备注/Memo

备注/Memo:
[收稿日期] 2019-10-12
[基金项目] 湖北省科技厅重点项目( 2014BEC008)
[第一作者] 郭   锋(1995-), 男, 湖北黄冈人,湖北工业大学硕士研究生,研究方向为高性能纤维混凝土
[通信作者] 苏   骏(1971-), 男, 安徽六安人,工学博士,湖北工业大学教授,研究方向为混凝土结构计算与工程结构抗震
更新日期/Last Update: 2020-08-16