参考文献/References:
[1] HAUGEN E. The Ecology of Language: Essays by Einar Haugen (selected and introduced by A. S. Dil)[C]. California: Stanford University Press, 1972.
[2] 何伟, 张瑞杰. 生态话语分析模式构建[J]. 中国外语, 2017(5): 56-64.
[3] HALLIDAY M A K. New ways of meaning: the challenge to applied linguistics [J]. Journal of Applied Linguistics, 1990, (6): 7-16.
[4] 何伟, 魏榕. 国际生态话语之及物性分析模式构建[J]. 现代外语, 2017(5): 597-607.
[5] 谭晓春,黄国文.自然诗歌翻译的功能语言学解读——以孟浩然《春晓》为例[J]. 外语教学, 2019(5):72-78.
[6] 陈令君. 及物性系统视角下田园诗的生态话语分析——以陶渊明《归园田居》(其一)及其英译为例[J]. 山东外语教学, 2019, 40(1): 23-32.
[7] HALLIDAY M A K. Introduction to functional grammar [M]. London: Arnold, 1985.
[8] HALLIDAY M A K. Some notes on “deep” grammar[J]. Journal of Linguistics, 1966, 2(1):57-67.
[9] 安德义. 论语解读[M]. 北京: 中华书局, 2007.
[10] 罗迪江. 生态翻译学视域下“译者”的作用与本质探讨:兼论对“译者中心”的质疑及回应 [J]. 山东外语教学, 2018(6):119-125.
相似文献/References:
[1]熊韧,曹海印,王焱清,等.非牛顿润滑静压轴承的节流器流量方程修正[J].湖北工业大学学报,2019,34(5):6.
XIONG Ren,CAO Haiyin,WANG Yanqing,et al.Modified restrictor flow equations of hydrostatic bearings ubricated by non-Newtonian fluids[J].,2019,34(6):6.
[2]王照远,曹 民,王 毅,等. 场景与数据双驱动的隧道图像拼接方法[J].湖北工业大学学报,2020,(4):11.
WANG Zhaoyuan,CAO Min,WANG Yi,et al. Tunnel Image Stitching Method based on Scene and Data[J].,2020,(6):11.
[3]潘 健,梁佳成,陈凤娇,等. 单电流闭环多重PR控制的LCL型逆变器[J].湖北工业大学学报,2020,(4):16.
PAN Jian,LIANG Jiacheng,CHEN Fengjiao,et al. Design of LCL Grid Connected Inverter based on Single Closed Loop Control and Multiple PR Controllers[J].,2020,(6):16.
[4]王晓光,赵 萌,文益雪,等. 定子闭口槽结构对永磁电机齿槽转矩影响分析[J].湖北工业大学学报,2020,(4):25.
WANG Xiaoguang,ZHAO Meng,WEN Yixue,et al. Study on Cogging Torque and Vibration Noise of Permanent Magnet Motor with Segmental Stator and Closed-Slot[J].,2020,(6):25.
[5]宇 卫,凃玲英,陈 健. 风电场集中接入对集电线电流保护的影响[J].湖北工业大学学报,2020,(4):29.
YU Wei,TU Lingying,CHEN Jian. Effect of the Collective Line Current Protection when Wind Farms are Centralized Accessed to the Power System[J].,2020,(6):29.
[6]廖政斌,王泽飞,祝 珊. 二惯量系统谐振在线抑制及相位补偿[J].湖北工业大学学报,2020,(4):34.
LIAO Zhengbin,WANG Zefei,ZHU Shan. Online Resonance Suppression and Phase Compensation for Double Inertia System[J].,2020,(6):34.
[7]王 欣,游 颖,姜天翔,等. 面向3D打印过程的产品工艺设计和优化[J].湖北工业大学学报,2020,(4):39.
WANG Xin,YOU Ying,JIANG Tianxiang,et al. Product Process Design and Optimization for 3D Printing Processes[J].,2020,(6):39.
[8]冉晶晶,文 红,罗雅梅,等. 全自动样品前处理平台及其控制系统[J].湖北工业大学学报,2020,(4):43.
RAN Jingjing,WEN Hong,LUO Yamei,et al. Research on Automatic Sample Preprocessing Platform and its Control System[J].,2020,(6):43.
[9]杨 磊,马志艳,石 敏,等. 基于模糊PID的小型冷库过热度控制方法[J].湖北工业大学学报,2020,(4):43.
YANG Lei,MA Zhiyan,SHI Min,et al. Research on Superheat Control Method of Small Cold Storage based on Fuzzy PID[J].,2020,(6):43.
[10]黄 晶,周细枝,周业望. 动态注塑成型模具的设计与实验研究[J].湖北工业大学学报,2020,(4):52.
HUANG Jing,ZHOU Xizhi,ZHOU Yewang. Design and Experimental Study of Dynamic Injection Molding[J].,2020,(6):52.