参考文献/References:
[1] 李鹏飞,赵星光,郭政,等. 北山花岗岩在三轴压缩条件下的强度参数演化[J]. 岩石力学与工程学报,2017,36(7):1599-1610.
[2] 徐小丽,高峰,张志镇. 高温作用后花岗岩三轴压缩试验研究[J].岩土力学,2014,35(11): 3177-3183.
[3] 张明,王菲,杨强. 基于三轴压缩实验的岩石统计损伤本构模型[J]. 岩土工程学报,2013,35(11):1965-1971.
[4] DENG JIAN,LI SHAOJUN,JIANG QUAN, et al,Probabilistic analysis of shear strength of intact rock in triaxial compression: a case study of Jinping II project[J].Tunneling and Underground Space Technology,2021,111(4):1-13.
[5] JIU-CHANG ZHANG,ZHI-NAN LIN,BO DONG, et al. Triaxial compression testing at constant and reducing confining pressure for the mechanical characterization of a specific type of sandstone[J]. Rock Mechanics and Rock Engineering,2021,41(9):1-14.
[6] WEI YUANLONG,LIU WEI,HOU ZHENKUN, et al. Experimental study on the anisotropic characteristics and engineering application of tight sandstone[J]. Advance in Materias Science and Engineering,2021,2021(8):1-12.
[7] WANG HAOTENG,HE MINGMING,PANG FAN, et al. Energy dissipation-based method for brittleness evolution and yield strength determination of rock[J]. Journal of Petroleum Science and Engineering,2021,200(4):1-12.
[8] 中华人民共和国水利部. 水利水电工程岩石试验规程:SL 264-2001[S]. 北京: 中国水利水电出版社, 2001.
[9] MARTIN C D,CHANDLER N A. The progressive fracture of lac du bonnet granite[J].International Journal of Rock Mechanics and Mining Science and Geomechanics Abstracts,1994,31(6): 643-659.
[10] HAJIABDOLMAJID V,KAISER P K,MARTIN C D. Modelling brittle failure of rock[J]. International Journal of Rock Mechanics and Mining Sciences,2000,39(6):731-741.
[11] 杨艳霜,周辉,张传庆,等. 大理岩单轴压缩时滞性破坏的试验研究[J]. 岩土力学,2011,32(9):2714-2720.
[12] 蔡美峰,何满超,刘东燕. 岩石力学与工程[M]. 北京: 科学出版社,2013:88-107.
[13] 尤明庆. 完整岩石的强度和强度准则[J]. 复旦学报(自然科学版),2013,52(5):569-582.
[14] 刘新东,郝际平. 连续介质损伤力学[M]. 北京:国际出版社,2011.
相似文献/References:
[1]熊韧,曹海印,王焱清,等.非牛顿润滑静压轴承的节流器流量方程修正[J].湖北工业大学学报,2019,34(5):6.
XIONG Ren,CAO Haiyin,WANG Yanqing,et al.Modified restrictor flow equations of hydrostatic bearings ubricated by non-Newtonian fluids[J].,2019,34(5):6.
[2]王照远,曹 民,王 毅,等. 场景与数据双驱动的隧道图像拼接方法[J].湖北工业大学学报,2020,(4):11.
WANG Zhaoyuan,CAO Min,WANG Yi,et al. Tunnel Image Stitching Method based on Scene and Data[J].,2020,(5):11.
[3]潘 健,梁佳成,陈凤娇,等. 单电流闭环多重PR控制的LCL型逆变器[J].湖北工业大学学报,2020,(4):16.
PAN Jian,LIANG Jiacheng,CHEN Fengjiao,et al. Design of LCL Grid Connected Inverter based on Single Closed Loop Control and Multiple PR Controllers[J].,2020,(5):16.
[4]王晓光,赵 萌,文益雪,等. 定子闭口槽结构对永磁电机齿槽转矩影响分析[J].湖北工业大学学报,2020,(4):25.
WANG Xiaoguang,ZHAO Meng,WEN Yixue,et al. Study on Cogging Torque and Vibration Noise of Permanent Magnet Motor with Segmental Stator and Closed-Slot[J].,2020,(5):25.
[5]宇 卫,凃玲英,陈 健. 风电场集中接入对集电线电流保护的影响[J].湖北工业大学学报,2020,(4):29.
YU Wei,TU Lingying,CHEN Jian. Effect of the Collective Line Current Protection when Wind Farms are Centralized Accessed to the Power System[J].,2020,(5):29.
[6]廖政斌,王泽飞,祝 珊. 二惯量系统谐振在线抑制及相位补偿[J].湖北工业大学学报,2020,(4):34.
LIAO Zhengbin,WANG Zefei,ZHU Shan. Online Resonance Suppression and Phase Compensation for Double Inertia System[J].,2020,(5):34.
[7]王 欣,游 颖,姜天翔,等. 面向3D打印过程的产品工艺设计和优化[J].湖北工业大学学报,2020,(4):39.
WANG Xin,YOU Ying,JIANG Tianxiang,et al. Product Process Design and Optimization for 3D Printing Processes[J].,2020,(5):39.
[8]冉晶晶,文 红,罗雅梅,等. 全自动样品前处理平台及其控制系统[J].湖北工业大学学报,2020,(4):43.
RAN Jingjing,WEN Hong,LUO Yamei,et al. Research on Automatic Sample Preprocessing Platform and its Control System[J].,2020,(5):43.
[9]杨 磊,马志艳,石 敏,等. 基于模糊PID的小型冷库过热度控制方法[J].湖北工业大学学报,2020,(4):43.
YANG Lei,MA Zhiyan,SHI Min,et al. Research on Superheat Control Method of Small Cold Storage based on Fuzzy PID[J].,2020,(5):43.
[10]黄 晶,周细枝,周业望. 动态注塑成型模具的设计与实验研究[J].湖北工业大学学报,2020,(4):52.
HUANG Jing,ZHOU Xizhi,ZHOU Yewang. Design and Experimental Study of Dynamic Injection Molding[J].,2020,(5):52.