参考文献/References:
[1] WANG Z, SHEPLEY M M C. Can aging-in-place be promoted by the built environment near home for physical activity: a case study of non-Hispanic White elderly in Texas[J]. Journal of Housing and the Built Environment, 2018, 33(4): 749-766.
[2] CARROLL S, JESPERSEN A P, TROELSEN J. Going along with older people: exploring age-friendly neighborhood design through their lens[J]. Journal of Housing and the Built Environment, 2020,35(2):555-572.
[3] MOHIT M A, IBRAHIM M, RASHID Y R. Assessment of residential satisfaction in newly designed public low-cost housing in Kuala Lumpur, Malaysia[J]. Habitat International, 2010, 34(1): 18-27.
[4] YAMASAKI J, SHARF B F. Opting out while fitting in: How residents make sense of assisted living and cope with community life[J]. Journal of Aging Studies, 2011, 25(1): 13-21.
[5] PIRHONEN J, PIETIL I. Perceived resident–facility fit and sense of control in assisted living[J]. Journal of Aging Studies, 2016, 38: 47-56.
[6] ADDO I A. Assessing residential satisfaction among low income households in multi-habited dwellings in selected low income communities in Accra[J]. Urban Studies, 2016, 53(4): 631-650.
[7] IBEM E O. Accessibility of services and facilities for residents in public housing in urban areas of Ogun State, Nigeria[C]. Urban Forum. Springer Netherlands, 2013, 24(3): 407-423.
[8] 李斌, 李雪, 王依明. 康复类社区综合养老设施布局选址研究[J]. 建筑学报, 2019(2): 44-49.
[9] 李灵芝, 张嘉澍, 仇白羽, 等. 大规模保障住区养老设施配置优化研究——以南京市为例[J]. 现代城市研究, 2016(6): 11-15.
[10] 朱小雷. 广州保障性社区养老照顾设施规划设计现状及其对策[J]. 工业建筑, 2015, 45(7): 54-57.
[11] 陈红霞, 樊舒舒, 李德智. 大型保障房社区基本公共服务设施可达性评价——以南京岱山保障房片区为例[J]. 建筑经济, 2018, 39(12): 81-85.
[12] 何静, 周典, 徐怡珊, 等. 城市社区养老设施空间可达性度量方法研究[J]. 建筑学报, 2018(S1): 18-22.
[13] 颜秉秋, 高晓路. 城市老年人居家养老满意度的影响因子与社区差异[J]. 地理研究, 2013, 32(7): 1269-1279.
[14] 何芳, 李晓丽. 保障性社区公共服务设施供需特征及满意度因子的实证研究——以上海市宝山区顾村镇“四高小区”为例[J]. 城市规划学刊, 2010(4): 83-90.
[15] 陆宁, 李芳宇, 刘昌贵. 可持续视角下老旧社区公共设施适老性的优化设计研究[J]. 包装工程, 2018, 39(22): 164-170.
[16] 梅大伟, 张洪波. 基于层次分析法的养老社区适老环境评价[J]. 建筑节能, 2017(6): 90-94.
[17] 于一凡, 田菲, 贾淑颖. 上海市社区居家养老服务设施体系研究[J]. 建筑学报, 2016(10): 93-97.
[18] 《中国卫生统计年鉴》编辑委员会. 中国卫生统计年鉴[M]. 北京:中国协和医科大学出版社, 2012.
[19] 中华人民共和国住房和城乡建设部. 老年人照料设施建筑设计标准(JGJ450-2018)[S]. 北京:中国建筑工业出版社, 2016.
[20] 中华人民共和国住房和城乡建设部. 城市居住区规划设计规范(GB50180-2018)[S]. 北京: 中国建筑工业出版社, 2018.
[21] 中华人民共和国住房和城乡建设部. 城镇老年人设施规划规范(GB50437-2018)[S]. 北京: 中国计划出版社, 2018.
[22] 夏固萍. 基于老年人需求特征的机构养老设施公共服务用房配置策略研究——以银川市城区机构养老设施为例[J]. 华中建筑, 2020, 38(6): 53-57.
相似文献/References:
[1]熊韧,曹海印,王焱清,等.非牛顿润滑静压轴承的节流器流量方程修正[J].湖北工业大学学报,2019,34(5):6.
XIONG Ren,CAO Haiyin,WANG Yanqing,et al.Modified restrictor flow equations of hydrostatic bearings ubricated by non-Newtonian fluids[J].,2019,34(4):6.
[2]王照远,曹 民,王 毅,等. 场景与数据双驱动的隧道图像拼接方法[J].湖北工业大学学报,2020,(4):11.
WANG Zhaoyuan,CAO Min,WANG Yi,et al. Tunnel Image Stitching Method based on Scene and Data[J].,2020,(4):11.
[3]潘 健,梁佳成,陈凤娇,等. 单电流闭环多重PR控制的LCL型逆变器[J].湖北工业大学学报,2020,(4):16.
PAN Jian,LIANG Jiacheng,CHEN Fengjiao,et al. Design of LCL Grid Connected Inverter based on Single Closed Loop Control and Multiple PR Controllers[J].,2020,(4):16.
[4]王晓光,赵 萌,文益雪,等. 定子闭口槽结构对永磁电机齿槽转矩影响分析[J].湖北工业大学学报,2020,(4):25.
WANG Xiaoguang,ZHAO Meng,WEN Yixue,et al. Study on Cogging Torque and Vibration Noise of Permanent Magnet Motor with Segmental Stator and Closed-Slot[J].,2020,(4):25.
[5]宇 卫,凃玲英,陈 健. 风电场集中接入对集电线电流保护的影响[J].湖北工业大学学报,2020,(4):29.
YU Wei,TU Lingying,CHEN Jian. Effect of the Collective Line Current Protection when Wind Farms are Centralized Accessed to the Power System[J].,2020,(4):29.
[6]廖政斌,王泽飞,祝 珊. 二惯量系统谐振在线抑制及相位补偿[J].湖北工业大学学报,2020,(4):34.
LIAO Zhengbin,WANG Zefei,ZHU Shan. Online Resonance Suppression and Phase Compensation for Double Inertia System[J].,2020,(4):34.
[7]王 欣,游 颖,姜天翔,等. 面向3D打印过程的产品工艺设计和优化[J].湖北工业大学学报,2020,(4):39.
WANG Xin,YOU Ying,JIANG Tianxiang,et al. Product Process Design and Optimization for 3D Printing Processes[J].,2020,(4):39.
[8]冉晶晶,文 红,罗雅梅,等. 全自动样品前处理平台及其控制系统[J].湖北工业大学学报,2020,(4):43.
RAN Jingjing,WEN Hong,LUO Yamei,et al. Research on Automatic Sample Preprocessing Platform and its Control System[J].,2020,(4):43.
[9]杨 磊,马志艳,石 敏,等. 基于模糊PID的小型冷库过热度控制方法[J].湖北工业大学学报,2020,(4):43.
YANG Lei,MA Zhiyan,SHI Min,et al. Research on Superheat Control Method of Small Cold Storage based on Fuzzy PID[J].,2020,(4):43.
[10]黄 晶,周细枝,周业望. 动态注塑成型模具的设计与实验研究[J].湖北工业大学学报,2020,(4):52.
HUANG Jing,ZHOU Xizhi,ZHOU Yewang. Design and Experimental Study of Dynamic Injection Molding[J].,2020,(4):52.