[1]黄 晶,周细枝,周业望. 动态注塑成型模具的设计与实验研究[J].湖北工业大学学报,2020,(4):52-54.
　HUANG Jing,ZHOU Xizhi,ZHOU Yewang. Design and Experimental Study of Dynamic Injection Molding[J].,2020,(4):52-54.
点击复制

 动态注塑成型模具的设计与实验研究()
分享到：

《湖北工业大学学报》[ISSN:1003-4684/CN:42-1752/Z]

卷:
期数:
2020年第4期
页码:
52-54
栏目:
湖北工业大学学报
出版日期:
2020-08-31

文章信息/Info

Title:
 Design and Experimental Study of Dynamic Injection Molding
文章编号:
1003-4684(2020)04-0052-03
作者:
 黄 晶;  周细枝;  周业望
 湖北工业大学机械工程学院， 湖北 武汉 430068
Author(s):
 HUANG Jing;  ZHOU Xizhi;  ZHOU Yewang
 School of Mechanical Engineering，Hubei Univ.of Tech.，Wuhan 430068，China
关键词:
 ; 非牛顿流体流动理论;  复合纤维材料;  动态注塑成型
Keywords:
 ; Non-Newtonian Flow theory;  fiber composite;  dynamic injection molding
分类号:
TH145
文献标志码:
A
摘要:
 为进一步增强复合纤维材料的力学性能，基于复合纤维材料的非牛顿流体流动理论，设计一种使复合纤维材料的纤维在注塑生产时能够趋于定向分布的动态注塑模具，并对该动态注塑的原理进行论述。拉伸实验证明，动态注塑模具生产制造的塑件，其力学性能优于传统注塑模具生产的塑件；通过对两种注塑模具生产的塑件横断截面的观察分析，相比于传统注塑模具生产的塑件，动态注塑模具生产的塑件，其纤维的定向化程度更高，与动态注塑原理相吻合，验证了动态注塑成型的可行性。
Abstract:
 Based on the theory of fiber composite flow, a dynamic injection mold for realizing the orientation distribution of composite fiber orientation is designed to enhance the performance of composite injection molding products. The mechanism of this dynamic injection mold is analyzed. The tensile test shows that the mechanical properties of the plastic components produced by the dynamic injection mold are superior to those produced by the traditional injection mold. The analysis of the lateral sections of the plastic parts produced by these two injection molds reveals that, compared to the plastic components produced by the traditional mold, those produced by the dynamic injection mold have a higher degree of fiber orientation and a better congruence of the dynamic injection theory. The feasibility of the dynamic injection molding is thus verified.

参考文献/References:

[1] 唐亦农,陈文芳.非牛顿流体在Hele-Shaw模型中的流动[J].力学与实践,1989(3):26-30.
[2] 马兰. 注塑成型充填数值模拟中Hele-Shaw假设适用性分析[D].郑州：郑州大学,2010.
[3] 李文文,杨丽颖,王守仁,等.石墨烯增强TiAl自润滑复合材料的力学性能研究[J].机械强度,2019,41(5):1085-1089.
[4] 陈雄兵. 注射成型模腔中纤维取向数值模拟[D].北京：北京化工大学,2013.
[5] 张俊,张冰.基于UG的缓冲件注塑模具设计[J].塑料科技,2019,47(9):95-98.
[6] 张静华.自动电子万能试验机中自动拉伸试验及其数据处理[J].机械工业自动化,1981(1):38-45.
[7] 孙慧. 材料试验中试样夹持技术方法的研究[D].长春：吉林大学,2014.
[8] 由瑞.分析偏光显微镜照相在纺织品检验中的应用[J].轻工标准与质量,2016(1):58-59.
[9] 俞淑芳. 基于各向异性纳米材料偏光特性检测食品中重金属离子[D].长沙：中南林业科技大学,2019.
[10] 李永岚,汪晓蕾,王维民,等.组织工程学研究中偏光显微镜的应用[J].实用美容整形外科杂志,1997(5):13-16.

相似文献/References:

[1]熊韧,曹海印,王焱清,等.非牛顿润滑静压轴承的节流器流量方程修正[J].湖北工业大学学报,2019,34(5):6.
　XIONG Ren,CAO Haiyin,WANG Yanqing,et al.Modified restrictor flow equations of hydrostatic bearings ubricated by non-Newtonian fluids[J].,2019,34(4):6.
[2]王照远,曹 民,王 毅,等. 场景与数据双驱动的隧道图像拼接方法[J].湖北工业大学学报,2020,(4):11.
　WANG Zhaoyuan,CAO Min,WANG Yi,et al. Tunnel Image Stitching Method based on Scene and Data[J].,2020,(4):11.
[3]潘 健,梁佳成,陈凤娇,等. 单电流闭环多重PR控制的LCL型逆变器[J].湖北工业大学学报,2020,(4):16.
　PAN Jian,LIANG Jiacheng,CHEN Fengjiao,et al. Design of LCL Grid Connected Inverter based on Single Closed Loop Control and Multiple PR Controllers[J].,2020,(4):16.
[4]王晓光,赵 萌,文益雪,等. 定子闭口槽结构对永磁电机齿槽转矩影响分析[J].湖北工业大学学报,2020,(4):25.
　WANG Xiaoguang,ZHAO Meng,WEN Yixue,et al. Study on Cogging Torque and Vibration Noise of Permanent Magnet Motor with Segmental Stator and Closed-Slot[J].,2020,(4):25.
[5]宇 卫,凃玲英,陈 健. 风电场集中接入对集电线电流保护的影响[J].湖北工业大学学报,2020,(4):29.
　YU Wei,TU Lingying,CHEN Jian. Effect of the Collective Line Current Protection when Wind Farms are Centralized Accessed to the Power System[J].,2020,(4):29.
[6]廖政斌,王泽飞,祝 珊. 二惯量系统谐振在线抑制及相位补偿[J].湖北工业大学学报,2020,(4):34.
　LIAO Zhengbin,WANG Zefei,ZHU Shan. Online Resonance Suppression and Phase Compensation for Double Inertia System[J].,2020,(4):34.
[7]王 欣,游 颖,姜天翔,等. 面向3D打印过程的产品工艺设计和优化[J].湖北工业大学学报,2020,(4):39.
　WANG Xin,YOU Ying,JIANG Tianxiang,et al. Product Process Design and Optimization for 3D Printing Processes[J].,2020,(4):39.
[8]冉晶晶,文 红,罗雅梅,等. 全自动样品前处理平台及其控制系统[J].湖北工业大学学报,2020,(4):43.
　RAN Jingjing,WEN Hong,LUO Yamei,et al. Research on Automatic Sample Preprocessing Platform and its Control System[J].,2020,(4):43.
[9]杨 磊,马志艳,石 敏,等. 基于模糊PID的小型冷库过热度控制方法[J].湖北工业大学学报,2020,(4):43.
　YANG Lei,MA Zhiyan,SHI Min,et al. Research on Superheat Control Method of Small Cold Storage based on Fuzzy PID[J].,2020,(4):43.
[10]郑 振,赵大兴. 基于Modbus TCP高速网络数据通讯系统[J].湖北工业大学学报,2020,(4):55.
　ZHENG Zhen,ZHAO Daxing. High Speed Network Data Communication System based on Modbus TCP[J].,2020,(4):55.

备注/Memo

备注/Memo:
［收稿日期］ 2019-11-21
［第一作者］ 黄   晶(1993-)，男，湖北荆门人，湖北工业大学硕士研究生，研究方向为机械工程
更新日期/Last Update: 2020-08-16