[1]陈 昊,卢应发,谢 鹏,等. 公路岩质高边坡稳定性及支护分析[J].湖北工业大学学报,2021,(1):84-87.
 CHEN Hao,LU Yingfa,XIE Peng,et al. Analysis on Stability and Support of High Rock Slope of Highway[J].,2021,(1):84-87.
点击复制

 公路岩质高边坡稳定性及支护分析()
分享到:

《湖北工业大学学报》[ISSN:1003-4684/CN:42-1752/Z]

卷:
期数:
2021年第1期
页码:
84-87
栏目:
湖北工业大学学报
出版日期:
2021-02-18

文章信息/Info

Title:
 Analysis on Stability and Support of High Rock Slope of Highway
文章编号:
1003-4684(2021)01-0084-04
作者:
 陈 昊1 卢应发1 谢 鹏1 陈 诚2
1 湖北工业大学土木建筑与环境学院, 湖北 武汉 430068;
2 湖北省地质环境总站, 湖北 黄石 435000
Author(s):
 CHEN Hao1LU Yingfa1 XIE Peng1CHEN Cheng2
1 School of Civil Engin.,Architecture and Environment,Hubei Univ.of Tech.,Wuhan 430068,China;
2 Hubei Geological Environment Station, Huangshi 435000,China
关键词:
 公路边坡 有限元 MIDAS-GTS 框格梁 锚杆
Keywords:
 road slope finite element MIDAS GTS sash girder anchor
分类号:
TU431
文献标志码:
A
摘要:
 为探究边坡开挖加固时稳定性变化特征,依托公路岩质高边坡治理工程,运用MIDAS GTS建立高边坡三维模型,对开挖前及开挖不同阶段边坡的变形及稳定进行了对比分析。结果认为:经过分阶段开挖后的边坡,由于坡体自重的减小,坡体位移发展呈减弱态势,边坡整体稳定性增加;在仅采取框格梁支护后,坡体水平位移量远小于原始状态的边坡位移量,但大于坡体开挖完毕后的水平位移量;在框格梁的基础上增设预应力锚杆后,预应力锚杆的介入极大限制了边坡变形,使得坡体水平位移进一步减小;框格梁+预应力锚杆加固岩质边坡可以有效保证边坡的稳定性,建议在施工过程中加强边坡变形监测,确保工程安全。
Abstract:
 In order to explore the characteristics of stability changes during slope excavation and reinforcement, this paper, relying on the highway high rock slope treatment project, applies MIDAS GTS to establish a three-dimensional model of high slope, and conducts a comparative analysis of slope deformation and stability before and at different stages of excavation. The results show that after the slope is excavated in different stages, because of the decrease of the self-weight of the slope, the slope displacement development is weakened and the overall stability of the slope increases. The horizontal displacement of the slope is much less than that of the original state, but more than that of the slope after the excavation. After prestressed anchor is added on the basis of frame lattice beam, the intervention of prestressed anchor greatly restricts the deformation of slope, which further reduces the horizontal displacement of slope. It is suggested to strengthen the monitoring of slope deformation during the construction process to ensure the safety of the project.

参考文献/References:

[1] 陈祖煜,弥宏亮,汪小刚.边坡稳定三维分析的极限平衡方法[J]岩土工程学报, 2001(5):525-529.
[2] 李同录,王艳霞,邓宏科.一种改进的三维边坡稳定性分析方法[J].岩土工程学报, 2003(5):611-614.
[3] 陈菲.强度折减法在滑坡三维稳定性分析中的应用[D].武汉:中国科学院研究生院(武汉岩土力学研究所),2006.
[4] 陈云生,孟繁贺.基于三维地质建模的高速公路边坡数值分析[J].路基工程,2018(1):52-55. 
[5] 毕小勇,闫天俊,鲁杰.Midas-GTS(SRM)在边坡二维稳定性分析中的运用[J].自然灾害学报,2015,24(1):170-176.
[6] 邓爽,梁正勇.基于MIDAS/GTS对某高速公路路堑高边坡二次开挖稳定性的研究[J].公路工程,2019,44(6):266-270.
[7] 郭昊天,王志丰,王亚琼.基于有限元强度折减法的路堑高边坡稳定性分析[J].公路,2019,64(11):27-32.
[8] 焦宗涛. 基于Midas/GTS的小河沟1号滑坡稳定性及治理工程数值模拟研究[D].西安:长安大学,2016.

相似文献/References:

[1]熊韧,曹海印,王焱清,等.非牛顿润滑静压轴承的节流器流量方程修正[J].湖北工业大学学报,2019,34(5):6.
 XIONG Ren,CAO Haiyin,WANG Yanqing,et al.Modified restrictor flow equations of hydrostatic bearings ubricated by non-Newtonian fluids[J].,2019,34(1):6.
[2]王照远,曹 民,王 毅,等. 场景与数据双驱动的隧道图像拼接方法[J].湖北工业大学学报,2020,(4):11.
 WANG Zhaoyuan,CAO Min,WANG Yi,et al. Tunnel Image Stitching Method based on Scene and Data[J].,2020,(1):11.
[3]潘 健,梁佳成,陈凤娇,等. 单电流闭环多重PR控制的LCL型逆变器[J].湖北工业大学学报,2020,(4):16.
 PAN Jian,LIANG Jiacheng,CHEN Fengjiao,et al. Design of LCL Grid Connected Inverter based on Single Closed Loop Control and Multiple PR Controllers[J].,2020,(1):16.
[4]王晓光,赵 萌,文益雪,等. 定子闭口槽结构对永磁电机齿槽转矩影响分析[J].湖北工业大学学报,2020,(4):25.
 WANG Xiaoguang,ZHAO Meng,WEN Yixue,et al. Study on Cogging Torque and Vibration Noise of Permanent Magnet Motor with Segmental Stator and Closed-Slot[J].,2020,(1):25.
[5]宇 卫,凃玲英,陈 健. 风电场集中接入对集电线电流保护的影响[J].湖北工业大学学报,2020,(4):29.
 YU Wei,TU Lingying,CHEN Jian. Effect of the Collective Line Current Protection when Wind Farms are Centralized Accessed to the Power System[J].,2020,(1):29.
[6]廖政斌,王泽飞,祝 珊. 二惯量系统谐振在线抑制及相位补偿[J].湖北工业大学学报,2020,(4):34.
 LIAO Zhengbin,WANG Zefei,ZHU Shan. Online Resonance Suppression and Phase Compensation for Double Inertia System[J].,2020,(1):34.
[7]王 欣,游 颖,姜天翔,等. 面向3D打印过程的产品工艺设计和优化[J].湖北工业大学学报,2020,(4):39.
 WANG Xin,YOU Ying,JIANG Tianxiang,et al. Product Process Design and Optimization for 3D Printing Processes[J].,2020,(1):39.
[8]冉晶晶,文 红,罗雅梅,等. 全自动样品前处理平台及其控制系统[J].湖北工业大学学报,2020,(4):43.
 RAN Jingjing,WEN Hong,LUO Yamei,et al. Research on Automatic Sample Preprocessing Platform and its Control System[J].,2020,(1):43.
[9]杨 磊,马志艳,石 敏,等. 基于模糊PID的小型冷库过热度控制方法[J].湖北工业大学学报,2020,(4):43.
 YANG Lei,MA Zhiyan,SHI Min,et al. Research on Superheat Control Method of Small Cold Storage based on Fuzzy PID[J].,2020,(1):43.
[10]黄 晶,周细枝,周业望. 动态注塑成型模具的设计与实验研究[J].湖北工业大学学报,2020,(4):52.
 HUANG Jing,ZHOU Xizhi,ZHOU Yewang. Design and Experimental Study of Dynamic Injection Molding[J].,2020,(1):52.

备注/Memo

备注/Memo:
[收稿日期] 2020-05-15
[通信作者] 国家自然科学基金面上项目(41372363);三峡后续工作地质灾害防治项目(0001212015CC60005)
[第一作者] 陈 昊(1996-), 男, 湖北黄冈人,湖北工业大学硕士研究生,研究方向为岩土力学
更新日期/Last Update: 2021-02-19